Übersetzung im Kontext von „die Filteroptionen“ in Deutsch-Englisch von Reverso Context: Verwenden Sie die Filteroptionen, um die angezeigten Informationen. Übersetzung im Kontext von „Filteroptionen“ in Deutsch-Englisch von Reverso Context: Die zusätzlichen drei Filteroptionen wurden Ihren Auswahlkriterien. 5. Juli Zum einen betrifft das den Komfort bei der Arbeit mit gefilterten Ergebnissen und zum anderen betrifft es den Umfang der Filteroptionen. Use the filter options to refine the displayed information. Mithilfe von Zahlenfiltern können Sie einen benutzerdefinierten Filter anwenden:. Das Filtern nach Tags funktioniert natürlich weiterhin wie Sie es gewohnt sind. Wie sollten die denn beschädigt werden? Produkte werden nach dem Filtern auf der Website, nicht in der gleichen Reihenfolge, wie in der Kollektion dargestellt. Verwenden Sie die Filteroptionen , um die angezeigten Informationen zu verfeinern. The Filter Options section is enabled. Gebe einen Titel ein. Um einen individuellen Filter zu erstellen: Es befinden sich keine Einträge in Ihrer Datenquelle, die den Filteroptionen für diese Publikation entsprechen. You can add more than one machine, and filter the list by entering filter options.
Only takes effect for dates shown in human-readable format, such as when using --pretty. If -local is appended to the format e.
The differences to the strict ISO format are:. Note that the -local option does not affect the seconds-since-epoch value which is always measured in UTC , but does switch the accompanying timezone value.
As with --raw , this is always in UTC and therefore -local has no effect. See the strftime manual for a complete list of format placeholders.
Also enables parent rewriting, see History Simplification above. Mark which side of a symmetric difference a commit is reachable from. If combined with --boundary , those commits are prefixed with -.
Draw a text-based graphical representation of the commit history on the left hand side of the output. This may cause extra lines to be printed in between commits, in order for the graph history to be drawn properly.
Cannot be combined with --no-walk. This implies the --topo-order option by default, but the --date-order option may also be specified.
When --graph is not used, all history branches are flattened which can make it hard to see that the two consecutive commits do not belong to a linear branch.
This option puts a barrier in between them in that case. Listed below are options that control the formatting of diff output.
Some of them are specific to git-rev-list , however other diff options may be given. See git-diff-files for more options. With this option, diff output for a merge commit shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent and the result one at a time.
Furthermore, it lists only files which were modified from all parents. This flag implies the -c option and further compresses the patch output by omitting uninteresting hunks whose contents in the parents have only two variants and the merge result picks one of them without modification.
This flag makes the merge commits show the full diff like regular commits; for each merge parent, a separate log entry and diff is generated.
An exception is that only diff against the first parent is shown when --first-parent option is given; in that case, the output represents the changes the merge brought into the then-current branch.
If the commit is a merge, and if the pretty-format is not oneline , email or raw , an additional line is inserted before the Author: This line begins with "Merge: Note that the listed commits may not necessarily be the list of the direct parent commits if you have limited your view of history: There are several built-in formats, and you can define additional formats by setting a pretty.
Here are the details of the built-in formats:. The raw format shows the entire commit exactly as stored in the commit object. Notably, the SHA-1s are displayed in full, regardless of whether --abbrev or --no-abbrev are used, and parents information show the true parent commits, without taking grafts or history simplification into account.
Note that this format affects the way commits are displayed, but not the way the diff is shown e. To get full object names in a raw diff format, use --no-abbrev.
By default, colors are shown only when enabled for log output by color. Optionally truncate at the beginning ltrunc , the middle mtrunc or the end trunc if the output is longer than N columns.
The trailers string may be followed by a colon and zero or more comma-separated options. If the only option is given, omit non-trailer lines from the trailer block.
In other words, each commit has the message terminator character usually a newline appended, rather than a separator placed between entries.
This means that the final entry of a single-line format will be properly terminated with a new line, just as the "oneline" format does.
For example, these two are equivalent:. Useful for commands like git show that show the patch by default, or to cancel the effect of --patch. For each commit, show a summary of changes using the raw diff format.
Enable the heuristic that shifts diff hunk boundaries to make patches easier to read. This is the default. If a line exists in both the source and destination, exists only once, and starts with this text, this algorithm attempts to prevent it from appearing as a deletion or addition in the output.
It uses the "patience diff" algorithm internally. For instance, if you configured the diff. By default, as much space as necessary will be used for the filename part, and the rest for the graph part.
The information is put between the filename part and the graph part. Similar to --stat , but shows number of added and deleted lines in decimal notation and pathname without abbreviation, to make it more machine friendly.
For binary files, outputs two - instead of saying 0 0. Output only the last line of the --stat format containing total number of modified files, as well as number of added and deleted lines.
Output the distribution of relative amount of changes for each sub-directory. The behavior of --dirstat can be customized by passing it a comma separated list of parameters.
The defaults are controlled by the diff. The following parameters are available:. Compute the dirstat numbers by counting the lines that have been removed from the source, or added to the destination.
This ignores the amount of pure code movements within a file. In other words, rearranging lines in a file is not counted as much as other changes.
This is the default behavior when no parameter is given. For binary files, count byte chunks instead, since binary files have no natural concept of lines.
This is a more expensive --dirstat behavior than the changes behavior, but it does count rearranged lines within a file as much as other changes. Compute the dirstat numbers by counting the number of files changed.
Each changed file counts equally in the dirstat analysis. This is the computationally cheapest --dirstat behavior, since it does not have to look at the file contents at all.
Count changes in a child directory for the parent directory as well. The default non-cumulative behavior can be specified with the noncumulative parameter.
Directories contributing less than this percentage of the changes are not shown in the output. Output a condensed summary of extended header information such as creations, renames and mode changes.
Also, when --raw or --numstat has been given, do not munge pathnames and use NULs as output field terminators. Without this option, pathnames with "unusual" characters are quoted as explained for the configuration variable core.
Show only names and status of changed files. See the description of the --diff-filter option on what the status letters mean. Specify how differences in submodules are shown.
This format just shows the names of the commits at the beginning and end of the range. This format lists the commits in the range like git-submodule summary does.
This format shows an inline diff of the changes in the submodule contents between the commit range. Moved lines of code are colored differently.
The mode must be one of:. Any line that is added in one location and was removed in another location will be colored with color. This mode picks up any moved line, but it is not very useful in a review to determine if a block of code was moved without permutation.
Blocks of moved text of at least 20 alphanumeric characters are detected greedily. The detected blocks are painted using either the color. Adjacent blocks cannot be told apart.
Blocks of moved text are detected as in blocks mode. The blocks are painted using either the color. The change between the two colors indicates that a new block was detected.
Similar to zebra , but additional dimming of uninteresting parts of moved code is performed. The bordering lines of two adjacent blocks are considered interesting, the rest is uninteresting.
This configures how white spaces are ignored when performing the move detection for --color-moved. These modes can be given as a comma separated list:.
Ignore changes in amount of whitespace. This ignores whitespace at line end, and considers all other sequences of one or more whitespace characters to be equivalent.
Ignore whitespace when comparing lines. This ignores differences even if one line has whitespace where the other line has none.
Initially ignore any white spaces in the move detection, then group the moved code blocks only into a block if the change in whitespace is the same per line.
This is incompatible with the other modes. By default, words are delimited by whitespace; see --word-diff-regex below. Makes no attempts to escape the delimiters if they appear in the input, so the output may be ambiguous.
Use a special line-based format intended for script consumption. Note that despite the name of the first mode, color is used to highlight the changed parts in all modes if enabled.
Also implies --word-diff unless it was already enabled. Anything between these matches is considered whitespace and ignored!
A match that contains a newline is silently truncated! The regex can also be set via a diff driver or configuration option, see gitattributes or git-config.
Giving it explicitly overrides any diff driver or configuration setting. Diff drivers override configuration settings.
Warn if changes introduce conflict markers or whitespace errors. What are considered whitespace errors is controlled by core.
By default, trailing whitespaces including lines that consist solely of whitespaces and a space character that is immediately followed by a tab character inside the initial indent of the line are considered whitespace errors.
Exits with non-zero status if problems are found. Not compatible with --exit-code. Highlight whitespace errors in the context , old or new lines of the diff.
Multiple values are separated by comma, none resets previous values, default reset the list to new and all is a shorthand for old,new,context.
When this option is not given, and the configuration variable diff. The whitespace errors are colored with color. Instead of the first handful of characters, show the full pre- and post-image blob object names on the "index" line when generating patch format output.
In addition to --full-index , output a binary diff that can be applied with git-apply. Instead of showing the full byte hexadecimal object name in diff-raw format output and diff-tree header lines, show only a partial prefix.
This is independent of the --full-index option above, which controls the diff-patch output format. If generating diffs, detect and report renames for each commit.
For following files across renames while traversing history, see --follow. If n is specified, it is a threshold on the similarity index i.
Detect copies as well as renames. For performance reasons, by default, -C option finds copies only if the original file of the copy was modified in the same changeset.
This flag makes the command inspect unmodified files as candidates for the source of copy. This is a very expensive operation for large projects, so use it with caution.
Giving more than one -C option has the same effect. Omit the preimage for deletes, i. The resulting patch is not meant to be applied with patch or git apply ; this is solely for people who want to just concentrate on reviewing the text after the change.
In addition, the output obviously lacks enough information to apply such a patch in reverse, even manually, hence the name of the option.
Any combination of the filter characters including none can be used. Also, these upper-case letters can be downcased to exclude.
Note that not all diffs can feature all types. For instance, diffs from the index to the working tree can never have Added entries because the set of paths included in the diff is limited by what is in the index.
Similarly, copied and renamed entries cannot appear if detection for those types is disabled. Look for differences that change the number of occurrences of the specified string i.
See the pickaxe entry in gitdiffcore for more information. Look for differences that change the number of occurrences of the specified object.
The object can be a blob or a submodule commit. It implies the -t option in git-log to also find trees. Control the order in which files appear in the output.
This overrides the diff. All files with pathnames that match the first pattern are output first, all files with pathnames that match the second pattern but not the first are output next, and so on.
All files with pathnames that do not match any pattern are output last, as if there was an implicit match-all pattern at the end of the file.
If multiple pathnames have the same rank they match the same pattern but no earlier patterns , their output order relative to each other is the normal order.
Lines starting with a hash " " are ignored, so they can be used for comments. When run from a subdirectory of the project, it can be told to exclude changes outside the directory and show pathnames relative to it with this option.
When you are not in a subdirectory e. Show the context between diff hunks, up to the specified number of lines, thereby fusing hunks that are close to each other.
Allow an external diff helper to be executed. If you set an external diff driver with gitattributes , you need to use this option with git-log and friends.
Allow or disallow external text conversion filters to be run when comparing binary files. See gitattributes for details. Because textconv filters are typically a one-way conversion, the resulting diff is suitable for human consumption, but cannot be applied.
For this reason, textconv filters are enabled by default only for git-diff and git-log , but not for git-format-patch or diff plumbing commands.
Ignore changes to submodules in the diff generation. Using "none" will consider the submodule modified when it either contains untracked or modified files or its HEAD differs from the commit recorded in the superproject and can be used to override any settings of the ignore option in git-config or gitmodules.
When "untracked" is used submodules are not considered dirty when they only contain untracked content but they are still scanned for modified content.
Using "dirty" ignores all changes to the work tree of submodules, only changes to the commits stored in the superproject are shown this was the behavior until 1.
Using "all" hides all changes to submodules. By default entries added by "git add -N" appear as an existing empty file in "git diff" and a new file in "git diff --cached".
This option makes the entry appear as a new file in "git diff" and non-existent in "git diff --cached". This option could be reverted with --ita-visible-in-index.
Both options are experimental and could be removed in future. For more detailed explanation on these common options, see also gitdiffcore.
When "git-diff-index", "git-diff-tree", or "git-diff-files" are run with a -p option, "git diff" without the --raw option, or "git log" with the "-p" option, they do not produce the output described above; instead they produce a patch file.
File modes are printed as 6-digit octal numbers including the file type and file permission bits. The similarity index is the percentage of unchanged lines, and the dissimilarity index is the percentage of changed lines.
It is a rounded down integer, followed by a percent sign. The index line includes the SHA-1 checksum before and after the change. Pathnames with "unusual" characters are quoted as explained for the configuration variable core.
All the file1 files in the output refer to files before the commit, and all the file2 files refer to files after the commit. It is incorrect to apply each change to each file sequentially.
For example, this patch will swap a and b:. Any diff-generating command can take the -c or --cc option to produce a combined diff when showing a merge.
This is the default format when showing merges with git-diff or git-show. Note also that you can give the -m option to any of these commands to force generation of diffs with individual parents of a merge.
It is preceded with a "git diff" header, that looks like this when -c option is used:. It is followed by one or more extended header lines this example shows a merge with two parents:.
Chunk header format is modified to prevent people from accidentally feeding it to patch -p1. Combined diff format was created for review of merge commit changes, and was not meant for apply.
The change is similar to the change in the extended index header:. A - character in the column N means that the line appears in fileN but it does not appear in the result.
When shown by git diff-tree -c , it compares the parents of a merge commit with the merge result i. When shown by git diff-files -c , it compares the two unresolved merge parents with the working tree file i.
Show all commits since version v2. Show the changes during the last two weeks to the file gitk. We also aim to integrate these usage examples into our mobile applications mobile website, apps as quickly as possible.
You will find the translations found for all senses of the headword under the tab "Usage Examples". The examples come from the entire data collection of the PONS Dictionary and are all editorially certified.
Are you missing a word, phrase or translation? Send it to us, we look forward to hearing from you! Suggest a new entry.
The entry has been added to your favourites. You are not signed in. Please sign in or register for free if you want to use this function. An error has occured.
You can suggest improvements to this PONS entry here: Your message has now been forwarded to the PONS editorial department.
How can I copy translations to the vocabulary trainer? Collect the vocabulary that you want to remember while using the dictionary.
The items that you have collected will be displayed under "Vocabulary List". If you want to copy vocabulary items to the vocabulary trainer, click on "Import" in the vocabulary list.
How do I find the new sentence examples? How do I find the new example sentences?Registrieren Sie sich für weitere Beispiele tipico betrug Registrieren Einloggen. Das Anordnungs- und Filtermenü wird nicht auf der Euro slot casino Ansicht dargestellt. Verwenden Sie die Verbindung wurde zurückgesetzt.um die angezeigten Informationen zu verfeinern. If you select two or more columns or controls, the filter options will not be available. Benutzerdefinierte Roger federer french open 2019 und Textfilter werden in ähnlicher Weise angewendet. Wähle diesen aus, um den Filter anzuzeigen casino kornwestheim spielplan auszublenden. Reverso beitreten Registrieren Einloggen Mit Facebook einloggen. Only the filter options are displayed. MessageLabs Intelligence Jahressicherheitsbericht mehr Beispiele für die Übersetzung the filter options ansehen 18 Beispiele mit Übereinstimmungen. Dennoch ist das Diagramm möglichst schlicht gehalten. Die aktivierten Filterkriterien sind ebenfalls mit der gleichen grünen Farbe hinterlegt. Sie können den Phishing-Schutz deaktivieren oder aktivieren oder spielbank hamburg casino esplanade hamburg Filteroptionen ändern. Du kannst diese Optionen nur für die Gitterproduktgalerie und nicht für die Sliderproduktgalerie verwenden. The result in this example would be all the commits, except A and B and D itself, of course. You may not give any mchale tennis limiters. Use mailmap file to map author and committer names and email addresses to canonical cherry casino bonuscode ohne einzahlung names and email addresses. However, their parent list is rewritten: Support for these types of regular expressions is an optional compile-time dependency. You will find the translations found champions league tischtennis all senses of the headword under the tab "Usage Examples" Where do these examples come from? To get full object names spielerschutz a raw diff format, use --no-abbrev. Diamond league london are parsed in the order given on filteroptionen command line, so e. The example turns into: Send it to us, we look forward to hearing from you! Em quali live stream is preceded with a "git diff" header, lotte waldhof live looks like this when -c option is used:. Any root commits in git log -p output would be shown without a diff attached. See how foreign-language expressions are used in real life. Show only commits in the specified revision range.